Hi guys,
I’ve been using Ardour for a while and it runs fine & i’ve used it to create several pieces of music, and the sound has run okay…however, today (after a month or so away from it) I decided to create a new tune but don’t get any sound output, and the terminal gives me this:
lindsell@FUCKUP:~$ ardour2 WARNING: Your system has a limit for maximum amount of locked memory! This might cause Ardour to run out of memory before your system runs out of memory. You can view the memory limit with 'ulimit -l', and it is normally controlled by /etc/security/limits.conf Ardour/GTK 2.7.1 (built using 4422 and GCC version 4.3.2) Copyright (C) 1999-2008 Paul Davis Some portions Copyright (C) Steve Harris, Ari Johnson, Brett Viren, Joel Baker Ardour comes with ABSOLUTELY NO WARRANTY not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. This is free software, and you are welcome to redistribute it under certain conditions; see the source for copying conditions. loading default ui configuration file /usr/local/etc/ardour2/ardour2_ui_default.conf loading user ui configuration file /home/lindsell/.ardour2/ardour2_ui.conf Loading ui configuration file /usr/local/etc/ardour2/ardour2_ui_dark.rc theme_init() called from internal clearlooks engine ardour: [INFO]: Ardour will be limited to 1024 open files loading system configuration file /usr/local/etc/ardour2/ardour_system.rc loading user configuration file /home/lindsell/.ardour2/ardour.rc ardour: [INFO]: Using SSE optimized routines ardour: [INFO]: looking for control protocols in /home/lindsell/.ardour2/surfaces/:/usr/local/lib/ardour2/surfaces/ powermate: Opening of powermate failed - No such file or directory ardour: [INFO]: Control protocol powermate not usable ardour: [INFO]: Control surface protocol discovered: "Generic MIDI" ardour: [INFO]: Control surface protocol discovered: "Mackie" (ardour-2.7.1:13414): Gtk-WARNING **: GtkSpinButton: setting an adjustment with non-zero page size is deprecated (ardour-2.7.1:13414): Gtk-WARNING **: GtkSpinButton: setting an adjustment with non-zero page size is deprecated (ardour-2.7.1:13414): Gtk-WARNING **: GtkSpinButton: setting an adjustment with non-zero page size is deprecated (ardour-2.7.1:13414): Gtk-WARNING **: GtkSpinButton: setting an adjustment with non-zero page size is deprecated JACK COMMAND: /usr/bin/jackd -p 128 -T -d alsa -n 2 -r 48000 -p 1024 -d hw:0,0 jackd 0.109.2 Copyright 2001-2005 Paul Davis and others. jackd comes with ABSOLUTELY NO WARRANTY This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details JACK compiled with System V SHM support. loading driver .. apparent rate = 48000 creating alsa driver ... hw:0,0|hw:0,0|1024|2|48000|0|0|nomon|swmeter|-|32bit control device hw:0 configuring for 48000Hz, period = 1024 frames (21.3 ms), buffer = 2 periods ALSA: final selected sample format for capture: 16bit little-endian ALSA: use 2 periods for capture ALSA: final selected sample format for playback: 16bit little-endian ALSA: use 2 periods for playback loading bindings from /usr/local/etc/ardour2/mnemonic-us.bindings Loading session /home/lindsell/production/projects/ardour/sextra4 using snapshot sextra4 (1) Loading history from '/home/lindsell/production/projects/ardour/sextra4/sextra4.history'.
Is this a simple problem that i’m stupid enough not to see, or is something running amok with JACK??!
Kind regards,
Nate.