Jack X-Runs and how I solved it

8 replies [Last post]
ahellquist
User offline. Last seen 3 days 17 hours ago. Offline
Joined: 2011-11-16
Posts:

This is a placeholder for the text I just wrote that does not get thru the filter.

It is hard to share ideas if there is a filter stopping me with no obvious reason.

Stay tuned and hopefully I will make it somehow.

Sincerely Anders

ahellquist
User offline. Last seen 3 days 17 hours ago. Offline
Joined: 2011-11-16
Posts:

Your submission has triggered the spam filter and will not be accepted.

I will keep my story for a while and try to find a way to understand the filter..
If someone is struggling with x-runs and need som input. PM me (if PM works) It was a good story btw ;-)

/Filtred guy

vervelover
vervelover's picture
User offline. Last seen 2 weeks 2 hours ago. Offline
Joined: 2009-06-10
Posts:

I would like to hear the story. Could you try again posting it? The spam filter should ask you for a captcha before blocking the message..

ahellquist
User offline. Last seen 3 days 17 hours ago. Offline
Joined: 2011-11-16
Posts:

The spam filter does not give me the option but blocks it and says it will not let me submit. Anyway I will try yet again.

I managed to realize that part of my problem was the fact I was using virtualbox on my laptop. Most hypervisors will probably hog the high performance timer /dev/hpet and make jackd less realtime capable.

In my case I simply had to unload the kernel modules to have hpet back and than give myself proper permissions. I also had to use jackd -c h

After that I suddenly can use my computer for a long time without have any xruns.

Anders

ahellquist
User offline. Last seen 3 days 17 hours ago. Offline
Joined: 2011-11-16
Posts:

Next thing I will try is to get my Presonus FP10s work with the new firewire stack and my TI based 800mbit Expresscard. That used to work but seems a lot more difficult with current level of software than back in the old days.

I hope this can help someone else to troubleshoot their problems.

Anders

seablade
User offline. Last seen 4 hours 4 min ago. Offline
Joined: 2007-01-22
Posts:

Send me your post to

seablaede gmail

Note the extra 'e' in seablaede for the email address. I will try to get it up here.

Seablade

ahellquist
User offline. Last seen 3 days 17 hours ago. Offline
Joined: 2011-11-16
Posts:

Hello again.
What I just wrote was a rewrite of my original post in a slighly shorten form. What do you want me to send?
Basicly what was my problem was the fact that I was having a hypervisor installed. In my case virtualbox but I would probably have the same issue if i had some vmware or kvm installed as well.

Before I unloaded the modules I could not run jackd withot xruns on my core I7 with 8gig ram and 8 cores and Ssd harddrive.

Anders

seablade
User offline. Last seen 4 hours 4 min ago. Offline
Joined: 2007-01-22
Posts:

I was just going to post the full thing for you if I could, if you are happy with what you have already posted I won't worry about it:)

Seablade

ahellquist
User offline. Last seen 3 days 17 hours ago. Offline
Joined: 2011-11-16
Posts:

I am ok with what I manage to submit so far. I think I have learned a little how to pass the filter so I will try to submit answers whenever I can.
Thanks.