RME HDSP 9652 Support

6 replies [Last post]
jamiejessup
User offline. Last seen 7 weeks 3 days ago. Offline
Joined: 2011-11-22
Posts:

Hello,

I was wondering if someone who has had success using the RME HDSP 9652 could help me out with configuration to get it working with JACK and ALSA. If you could describe the distro you are using and the necessary steps to get the hardware working with alsa and JACK that would be awesome.

I was using Tango Studio 10.04 unsuccessfully. I don't mind switching to another distro if it offers better support for this card.

seablade
User offline. Last seen 5 hours 53 min ago. Offline
Joined: 2007-01-22
Posts:

You shouldn't have any issue with that card, the main thing is that you need to have hdspconf and hdspmixer. hdspconf you need to use to set things like sample rate, hdspmixer needs to be open to actually pass audio through it(Stupid decision on ALSA's part, but there is a history here).

Seablade

Has a HDSP9632 laying around here somewhere.

Benjamin Scherrer
User offline. Last seen 2 days 10 hours ago. Offline
Joined: 2006-07-27
Posts:

Agreed, I have an HDSP9652 and it works great! I have only one issue: I have to start hdspmixer once after login to hear something, I'm here in Debian stable (I created a batch for opening & closing hdspmixer, it doesn't need to stay open all the time). Other than that, perfect drivers, no need to do *anything* for software installation.

What's your problem exactly?

Benjamin

GMaq
GMaq's picture
User offline. Last seen 3 days 16 hours ago. Offline
Joined: 2007-12-11
Posts:

Hi,

You can try the AV Linux LiveDVD it has all the ALSA tools gui's pre installed including hdspconf and hdspmixer. If your card works properly with the LiveDVD then it should work if you install AV Linux as well. I am quite surprised it doesn't work with Tango Studio, by all accounts it is a great multimedia OS and RME stuff is well supported by Ubuntu generally.

Get the LiveDVD here: http://www.bandshed.net/AVLinux.html

mcgruff
User offline. Last seen 1 year 3 weeks ago. Offline
Joined: 2008-08-30
Posts:

What do you get with lspci -vv? Should be something like this (Multiface):

03:06.0 Multimedia audio controller: Xilinx Corporation RME Hammerfall DSP (rev 37)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR-
therockgarden
User offline. Last seen 2 years 21 weeks ago. Offline
Joined: 2010-03-29
Posts:

Re: RME HDSP 9652

My experience is somewhat different than Seablade describes, in that I don't use hdspconf or need hdspmixer to use my RME card. I suppose, though, that's because what I have is a Digi9652, not an HDSP9652 (though I vaguely recall it *saying* HDSP9652 on the card itself; that *could* be pure hallucination, though; The card has been installed for years and I haven't actually looked at it in a long time):

02:02.0 Multimedia audio controller: Xilinx Corporation RME Digi9652 (Hammerfall) (rev 04)

Anyway, that card has worked just fine for me on Slackware and Slamd64 for quite a few years. The only "issue" I ever have is forgetting to switch the ADAT machines I use as AD/DA converters to "digital" input for playback.

Hrmmm... I suppose I haven't given you much help, but hopefully there's some useful tidbit you can find in at least the extra data point.

jamiejessup
User offline. Last seen 7 weeks 3 days ago. Offline
Joined: 2011-11-22
Posts:

Hey Folks,

As seablade said, I just had to make sure hdspmixer had been opened before I was able to get sound from ALSA. Once I made that realization everything was fine and dandy.

Thanks for your support!

Jamie